LACPactiveactive

ThisexampleshowshowtoconfiguretheLinkAggregationControlProtocol(LACP)onmultihomedcustomeredge(CE)andprovideredge(PE)devicesinan ...,LinkAggregationControlProtocol(LACP)...至於LACP是IEEEStandard，玩法與PAgP大致相同，只不過把兩個Mode的名稱由Desirable改成Active以及由Auto改成Passive。,Activemode:WhentheLACPisoperatinginactivemodeoneitherendofalink,bothportscansendPDUs.TheactiveLACPinitiatesanLACPc...

參考資訊如下
Configuring LACP for EVPN Active

This example shows how to configure the Link Aggregation Control Protocol (LACP) on multihomed customer edge (CE) and provider edge (PE) devices in an ...

EtherChannel PAgP LACP 以太通道

Link Aggregation Control Protocol (LACP) ... 至於LACP 是IEEE Standard，玩法與PAgP 大致相同，只不過把兩個Mode 的名稱由Desirable 改成Active 以及由Auto 改成Passive。

LACP operating modes

Active mode: When the LACP is operating in active mode on either end of a link, both ports can send PDUs. The active LACP initiates an LACP connection by ...

LACP: Why should I use passive

In active/passive active side negotiate and the passive side minimizes transmission of LACP packets (less noise). HTH. View solution in original post.

Link aggregation (difference between active and passive)

Active member sends LACP PDUs to passive member ever one second and passive member also responds by sending PDUs. Now if both members are in active mode then ...

Understanding the Link Aggregation Control Protocol (LACP)

LACP frames are always exchanged between neighboring ports when in active mode, whereas in passive mode frames are exchanged as long as the peer is active.

區域網路與switch LACP

Passive：被動類別，主要是可以回覆active 的類別，並且被動的達成LACP 的連線功能。若沒有任何LACP 的active 要求時， 就不會處理LACP 的任何動作。 所以，要達成LACP 連 ...

有關LACP(Link Aggregation Control Protocol‎)模式疑問?

既然是協商，一定會有一方主動提出協商的要求(為active)!另一方要接受此協商的要求(為passive)。另外也可以將兩方的switch都設定為on模式，讓 ...